NetCDF fields
NetCDF fields
A listing of fields saved in GXSM NetCDF files:
Embedded Files
Field name
FloatField
time
value
dimx
dimy
reftime
comment
title
username
dateofscan
rangex
rangey
rangez
dx
dy
dz
offsetx
offsety
alpha
contrast
bright
vrange_z
voffset_z
t_start
t_end
viewmode
basename
LInfo_dsc
LInfo_fmt
LInfo_fmo
LInfo_values
spm_scancontrol
extra_scan_info
sranger_info
sranger_mk2_hwi_bias
sranger_mk2_hwi_motor
sranger_mk2_hwi_mix0_current_set_point
sranger_mk2_hwi_mix1_voltage_set_point
sranger_mk2_hwi_mix2_aux2_set_point
sranger_mk2_hwi_mix3_aux3_set_point
sranger_mk2_hwi_mix0_current_mix_gain
sranger_mk2_hwi_mix1_voltage_mix_gain
sranger_mk2_hwi_mix2_aux2_mix_gain
sranger_mk2_hwi_mix3_aux3_mix_gain
sranger_mk2_hwi_mix0_current_mix_level
sranger_mk2_hwi_mix1_voltage_mix_level
sranger_mk2_hwi_mix2_aux2_mix_level
sranger_mk2_hwi_mix3_aux3_mix_level
sranger_mk2_hwi_mix0_current_mix_transform_mode
sranger_mk2_hwi_mix1_voltage_mix_transform_mode
sranger_mk2_hwi_mix2_aux2_mix_transform_mode
sranger_mk2_hwi_mix3_aux3_mix_transform_mode
sranger_mk2_hwi_move_speed_x
sranger_mk2_hwi_scan_speed_x
sranger_mk2_hwi_usr_cp
sranger_mk2_hwi_usr_ci
sranger_mk2_hwi_ldc_flag
sranger_mk2_hwi_frq_ref
sranger_mk2_hwi_IIR_f0_min
sranger_mk2_hwi_IIR_f0_max
sranger_mk2_hwi_IIR_I_crossover
sranger_mk2_hwi_LOG_I_offset
sranger_mk2_hwi_slope_compensation_flag
sranger_mk2_hwi_slope_x
sranger_mk2_hwi_slope_y
sranger_mk2_hwi_pre_points
sranger_mk2_hwi_XSM_Inst_VX
sranger_mk2_hwi_XSM_Inst_VY
sranger_mk2_hwi_XSM_Inst_VZ
sranger_mk2_hwi_XSM_Inst_VX0
sranger_mk2_hwi_XSM_Inst_VY0
sranger_mk2_hwi_XSM_Inst_VZ0
sranger_mk2_hwi_AC_amp
sranger_mk2_hwi_AC_frq
sranger_mk2_hwi_AC_phaseA
sranger_mk2_hwi_AC_phaseB
sranger_mk2_hwi_AC_avg_cycels
Description
time of scan in Unix t_end-t_start (see below)
dimx x values of scan in A
dimy y values of scan in A
datetime@start DoW M dd hh:mm:ss yyyy
Comment box at time of save
datetime@start DoW M dd hh:mm:ss yyyy
rangex in A
rangey in A
rangez in A
dx in A
dy in A
dz in A
image x offset in A
image y offset in A
Vrange_z value when img saved in A or V
Vrange_z value when img saved in A or V
start date/time in Unix time
end date/time in Unix time
viewmode 1=direct, 2=quick, 64=plane
directory/filename of original save file
check box in scanctr topdown bottomup etc
a lot of info from SR DSP control
Bias when scan is saved V
*newer version only
Current set point at end of scan
Voltage set point at end of scan
0=OFF, 1=Linear, 3=LOG, 9=Fuzzy
0=OFF, 1=Linear, 3=LOG, 9=Fuzzy
0=OFF, 1=Linear, 3=LOG, 9=Fuzzy
0=OFF, 1=Linear, 3=LOG, 9=Fuzzy
move speed in A/s
actual scan speed in A/s
proportional gain when saved
integral gain when saved
*newer version only
*newer version only
*newer version only
Piezo drive setting value
Piezo drive setting value
Piezo drive setting value
Piezo drive setting value
Piezo drive setting value
Piezo drive setting value
Page updated
Google Sites
Report abuse